#238 • Jepson Dry Premium Super cutoff saw with table and saw blades

Part of Shooting Target Manufacturer Auction (timed auction by AuctionAZ.com, LLC)

High bid $800.00

Status: Sold

Category: Shop Machinery and Equipment

15% BUYER'S PREMIUM Jepson Dry Premium Super cutoff saw with table and saw blades it was only used for several months.  * No need for lubricants (although using a small amount of lube dramatically extends the life of the blade and provides cleaner cuts) * No need for manual deburring * 2 vibration dampers for high cutting quality and downtime. This feature extends the life of the blades by reducing vibration and reduces burrs even further; I know this from experience because I have the Milwaukee knock-off that does not have these dampers. * High-torque motor for continuous operation * 1,400 RPM (this is NOT an abrasive chop saw, which operates at higher RPMs) * Patented quick release system for adjustable Miter cuts from 90-75-60-45° * 115 V, 21 A * I added a fence with slide to be able to make repeated cuts accurate within 1/32". * Factory installed rip fence that makes cuts cleaner by holding parts until completely cut. * "K" clamp for securing square tubing * All wear parts are field serviceable Includes Carbide Tipped Blades * All blades are Tenryu brand; the highest quality industrial blades you can install on this machine. The blade models are the STEEL-PRO series PRF-35572DK and PRF-35572DS. * 10-12 blades in good shape; can be resharpened many times. * A couple of blades have only been used once. * 2 blades are freshly resharpened. * "Arizona Carbide" in Phoenix can resharpen these blades (better than factory edge) for about $25-30/ea. * All blades are 14" 72-tooth TCG (Triple Chip Grind) for cutting ferrous metal with thicknesses from 16 gauge to 1/2" Includes saw table and blade holders. The holders were designed so you can conveniently take a stack of dull blades to Arizona Carbide for resharpening

Jepson Dry Premium Super cutoff saw with table and saw blades